Currencies:  
877-860-3620
CALL TOLL FREE

LPBL-20-2-LS

Starting at: $6,458.10


Please Choose Options:

Options




Ramps






Add to Cart:



  • Model: LPBL-20-2-LS
  • Manufactured by: Lift Products

  • Model:LPBL-20-2-LS
  • Platform size: 39.5" x 55"
  • Capacity: 2,200 lbs
  • Lowered Height: 3.25"
  • Raised height: 35"
  • Electric Hydraulic Lift Table
  • 115/1/60 Voltage Standard
  • Hand Controls Standard
  • Optional Ramps Available
    • 39.5" x 42" for carts
    • 39.5" x 48" for manual pallet trucks
    • 39.5" x 57" with 8" level off for powered pallet trucks

With a lowered height of only 4.25", The Lift-N-Spin can be loaded with a manual or electric pallet truck. This is accomplished by the exclusive auto-transition plate. The Lift-N-Spin has a raised height of 35". This is an ideal height for work positioning applications. The rotating top avoids the need to walk around or reach across.

The "Guardian" Series meets and exceeds both U.S. (ANSI) and European safety standards.



  • Exclusive Auto-Transition Plate is a key feature of the Lift-N-Spin. This Auto-Transition Plate provides a smooth surface from the ramp onto the rotating top. Once the lift is raised 1/4" the Auto-Transition Plate automatically lowers to allow the spinning of the rotating top. When the table is fully lowered the Auto-Transition Plate automatically raises again to provide a smooth surface to load the next pallet.
  • With a lowered height of only 4-1/4", The Lift-N-Spin can be loaded with a manual or electric pallet truck.
  • Remote Power Unit features a 1 HP motor. This is a highly efficient and quiet pump motor combination.
  • Upper platform fitted with safety perimeter, which prevents descent on contact with obstructions
  • Low-tension (24V) control box with up-down buttons. In addition the "Guardian" Series includes an electric circuit reset button in case the safety perimeter is actuated
  • New design external power pack equipped with a relief valve against overloading and a compensated flow valve for controlling lowering speed. The power pack is supplied with hoses 8' long
  • 115 voltage single phase standard . 230/460 voltage three phase is available as an option
  • Upper limit switch
  • Single acting cylinders with drainage system and check valve to stop the lift table lowering in case of hose burst
  • Safety clearance between scissors to prevent trapping during operations
  • Mechanical blocks for safe maintenance operations
  • Self-lubricating bushings on pivot points
  • Removable lifting eye(s) to facilitate handling and installation of the lift table
  • Motor 1 HP