Currencies:  
877-860-3620
CALL TOLL FREE

LPBL-30-1

Starting at: $5,698.10


Please Choose Options:

Options




Ramps





Add to Cart:



  • Model: LPBL-30-1
  • Manufactured by: Lift Products

Guardian Low Profile Lift Table

  • Model: LPBL-30-1
  • Capacity: 3,300 lbs
  • Platform size: 31.5"W x 61"L
  • Lowered height: 3-5/8"
  • Raised height: 33-1/8"
  • Lift speed: 25 second (approx)
  • Remote power unit: 1 HP Motor
  • 230/460/3/60 Voltage
  • Standard hand controls

The floor mount power unit has the pump motor and tank on the plate frame. This is ideal for placing the power unit under a conveyor or work bench or when locations are required. Features 8' hoses, power cord and control cord. Three-button control box has 115 voltage single phase standard on 1,100 lb. and 2,200 lb. capacity units. 230/460 voltage three phase on 3,300 lb. units

  • Extremely low collapsed heights of 2.9" to 4.3" provides access for rolling products, carts or pallet trucks
  • Single acting cylinders with drainage system and check valve to stop the lift from lowering in case of hose burst
  • Safety clearance between scissors to prevent trapping during operations
  • Removable lifting eye(s) to facilitate handling and installation of the lift table Bearings
  • Extremely low collapsed heights of 2.9" to 4.3" provides access for rolling products, carts or pallet trucks
  • Upper platform fitted with safety perimeter which prevents descent on contact with obstructions
  • External power unit equipped with a relief valve against overloading and a compensated flow valve for controlling lowering speed. Supplied with 8 ft. long hoses
  • 115 voltage single phase standard on 1,100 lb and 2,200 lb capacity units
  • 230/460 volt 3 phase standard on 3,300 lb units
  • Mechanical blocks for safe maintenance operations
  • Low tension (24v) control box with up-down buttons
  • Self-lubricating bushings on pivot points
  • Upper limit switch
  • 1 HP Motor