Currencies:  
877-860-3620
CALL TOLL FREE

CLT-04-48-S

Starting at:
Call for Price


Please Choose Options:

Voltage








Options




Oversized Platform

( +$407.50 )




  • Model: CLT-04-48-S
  • Manufactured by: ECOA

  • Model: CLT-04-48-S
  • Standard platform size: 24" x 48"
  • Oversize Platforms available up to 48" x 84"
  • Capacity: 4,000 lbs
  • Lowered Height: 8.5"
  • Raised height: 56.5"
  • Electric Hydraulic Lift Table
  • Single Phase and Three Phase Voltage Available
  • Hand Controls Standard




Standard Features Include:
  • Base and platform rollers are retained inside the channel frames
  • Internally or externally mounted .75HP, 115/230 V, 1PH, 60Hz or 208/230/460V, 3PH, 60Hz intermittent duty TENV super torque motor. Specify required voltage
  • 24V operating control voltage
  • NEMA-4X constant-pressure (water-tight, oil-tight and corrosionresistant) "UP-DOWN" pushbutton control station with 8 ft. straight cord
  • NEMA-12 prewired controls (dust/drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
  • All controller components are UL and/or CSA approved
  • 10 ft. power cord (connector not included)
  • Cylinders with internal stops
  • Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
  • Surfaces degreased, oxide primed and finished with two coats of enamel
  • Smooth steel tops
  • 3.75 in. straight toeguards with yellow and black safety stripes
  • Lifetime self-lubricating,PTFE lined, composite bearings
  • Safety restraint maintenance bars
  • Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
  • Includes hydraulic oil