Currencies:  
877-860-3620
CALL TOLL FREE

AC Lift - Manual Tilt

Starting at:
Call for Price


Please Choose Options:

Adaptors




Tilt Brake






  • Model: 405-120
  • Manufactured by: Morse

Omni-Lift Drum Rackers
  • Model: 405-120
  • AC power lift & manual tilt
  • Capacity: 800 lbs for full drum; 500 lbs for half full drum
  • Rack drums up to 72" high
  • Handles 55 gallon steel drums
  • Adaptor available for 55 gallon plastic drums

Morse Omni-Lift Drum Rackers enable you to rack drums up to 72" high. They are easily handled by one person. Lift a drum from either horizontal or vertical position on the floor. Handle your drum with a drum faucet in place . This allows your drum rack to serve as a dispensing station

Ergonomic power lift and power tilt options available with your choice of Air, AC or DC motors. Move drum racker easily on two 8" front wheels and two 4" casters under rear of frame.

We recommend the MORStop Tilt-Brake to automatically stop and hold the drum tilt angle on models with manual tilt control! It functions smoothly and quietly in both directions. Without the MORStop Tilt-Brake, a heavy unbalanced drum may tilt out of control.

Morse Omni-Lift Drum Racker

Use the Omni-Lift Drum Racker to pick up or place an upright or horizontal
drum on the floor. Secure your drum in the holder with the chain tightening
ratchet and spring loaded pawl assembly. The drum holder is designed with
strong teeth and redundant safety features for reliability and ease of use.
Manual tilt models have hand crank tilt control with safety gear covers.

Quickly and efficiently lift and rack your drum up to six feet (1.83 m) high.
The Omni-Lift moves easily on its two 8” (20.3 cm) wheels and two 4” (10.2
cm) casters. Clearance for 8” wheels is required under the lowest shelf.
Drum cradles on rack must be no wider than 16” (40.6 cm) for steel drum, or
no wider than 11” (28 cm) for plastic drum. Use Option # AP405 for plastic
drum.

You may also use Omni-Lift Drum Rackers for controlled dispensing.