Currencies:  
877-860-3620
CALL TOLL FREE

185A-HD

Starting at:
Call for Price


Please Choose Options:

Tilt Brake




Adaptors









Options







  • Model: 185A-HD
  • Manufactured by: Morse

Morse Kontrol Karrier
  • Model: 185A-HD
  • Capacity: 1,500 lbs
  • Lift, move, and pour a drum with your hoist or crane
  • Rotate drum 360 deg. in either direction
  • Drum adaptors available for fiber, plastic, and small dia. drums
  • Every Morse below hook drum handler is load tested at the factory as per American National Standard ASME B30.20 and a load test certificate is shipped enclosed with each unit

Morse Below Hook Drum Handler

Pouring drums above your reach is easy with Morse Kontrol-Karriers. Dispense drum contents with your hoist or crane. Even lift and invert a drum with a drum faucet in place. You control drum tilting with chain loop, 360 degrees in either direction.

These below-hook drum carriers have a pull chain to control the drum tilt with a 30:1 gear and sprocket ratio for pouring drums.

Diameter Adaptors: Add the correct diameter adaptor for each smaller drum to handle multiple drum sizes with the same drum handler. Simply and quickly place into and remove from the drum holder. Adaptors for 17.5" diameter and smaller have adjustable hold down brackets for up to 38" tall drums.

Drum Diameter Adaptors
Part # Fits Diameter
55/30-22 21.5" to 22"
55/30-20.5 20" to 20.5"
55/30-19 18.5" to 19"
55/30-17.5 17" to 17.5"
55/30-16 15.5" to 16"
55/30-14.5 14" to 14.5"

Rim clamps and bracket assembly for plastic and fiber drums

Fiber and Plastic Drum Holders
Part # Description
4560-P Top rim clamp for 55 gal plastic drums with top rim
4556-P Bracket assembly for rimless plastic or fiber drums

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
  • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

Use these below the hook drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dump the entire contents with a drum inverter.