Currencies:  
877-860-3620
CALL TOLL FREE

195A-A

Starting at:
Call for Price


Please Choose Options:

Adaptors









Options







  • Model: 195A-A
  • Manufactured by: Morse

Morse Power Tilt Kontrol Karrier
  • Model: 195A-A
  • Capacity: 1,500 lbs
  • Air Power Tilt
  • Drum Rotation: 360 deg. in either direction
  • Fully invert drum in 15 seconds
  • Hand held control valve
  • Accepts bracket assembly for plastic or fiber drum
  • Accepts drum adaptor for smaller drums
  • American National Standard ASME B30.20 and a load test certificate is shipped enclosed with each unit

Morse Power Tilt Below Hook Drum Handler

Morse engineers have designed these below-hook lifting devices with motor driven drum tilt for below hook applications. More than just a 55-gallon drum dumper (208 liter drum dumper), you have full 360 degree control of the powered drum rotation to dispense with this industrial lifting equipment.

Diameter Adaptors: Add the correct diameter adaptor for each smaller drum to handle multiple drum sizes with the same drum handler. Simply and quickly place into and remove from the drum holder. Adaptors for 17.5" diameter and smaller have adjustable hold down brackets for up to 38" tall drums.

Drum Diameter Adaptors
Part # Fits Diameter
55/30-22 21.5" to 22"
55/30-20.5 20" to 20.5"
55/30-19 18.5" to 19"
55/30-17.5 17" to 17.5"
55/30-16 15.5" to 16"
55/30-14.5 14" to 14.5"

Rim clamps and bracket assembly for plastic and fiber drums

Fiber and Plastic Drum Holders
Part # Description
4560-P Top rim clamp for 55 gal plastic drums with top rim
4556-P Bracket assembly for rimless plastic or fiber drums

  • Motorized drum rotation 3600 in both directions
  • AC Power Tilt models have 2-button pendant on 7 foot cord (2.1 m cord)
  • Air Power Tilt models have 3 position control valve on 12 foot (3.6 m) coiled hose
  • Available with single phase AC motor, 3-phase AC motor, or air motor
  • Designed for 22.5" (57 cm) diameter 55-gallon steel drum (208 liter steel drum). See options below for other drum types and sizes.
  • Capacity: 1500 Lb. (680 kg) Full drum, 800 Lb. (227 kg) Half-full drum
  • Order the correct size Diameter Adaptor for each smaller drum

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
  • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

Use these below the hook drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dump the entire contents with a drum inverter.

Call for more information: 877-860-3620