Currencies:  
877-860-3620
CALL TOLL FREE

Model 92-SS Stainless Steel


Call for Price




  • Model: 92-SS
  • Manufactured by: Morse

Morse Below Hook Drum Lifters
  • Model: 92-SS
  • Type 304 stainless steel
  • Capacity: 1,000 lbs
  • For rimmed 18" x 26" diameter drums
  • Automatically grip below the rim of your closed steel, fiber, or plastic drum
  • American National Standard ASME B30.20 and a load test certificate is shipped enclosed with each unit

Morse Below Hook Drum Lifters

Model 92 has self-adjusting tong-like action when you raise the hook, to lift a rimmed steel, plastic or fiber / cardboard drum.

Manually center drum lifter on top of your drum and adjust it to drum width. It then grips various common types of closed head drums. Lift a drum from four-drum pallets or rows of adjacent drums.

Use model 92 barrel lift to place your 55-gallon (208 liter) drum into an 85-gallon (322 liter) overpack drum or salvage drum.

NOTE: Bottom of the drum rim must be within 1" of the top of the drum. Weight of drum contents must not exceed drum manufacturer's packing limit. Drum lid must be properly secured.

Model 92 Drum Lifter Handles

  • Steel or Plastic rimmed drum 18" to 26" (46 to 66 cm) diameter
  • Typical plastic rimmed 30 to 55-gallon drum (114 to 208 liter drum)
  • Fiber drum (cardboard drum) 18.5" to 23" ID (47 to 87.4 cm ID), 19" to 23.5" OD (48.3 to 59.7 cm OD) with lever-lock
  • Steel salvage 85-gallon (322 liter) or overpack drum (NOT for plastic overpack)

Capacity: 1,000 Lb. (454 kg).

NOTE: Bottom of the drum rim must be within 1" of the top of the drum. Weight of drum contents must not exceed drum manufacturer's packing limit. Drum lid must be properly secured

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
  • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

Call for more information: 877-860-3620