Currencies:  
877-860-3620
CALL TOLL FREE

18" Wide x 120" Long


Call for Price




  • Model: MDRB-18-6-120
  • Manufactured by: Lewco

Lewco Roller Bed Belt Conveyor

  • Part number: MDRB-18-6-120
  • Belt Width: 18"
  • Length: 120"
  • Speed: 60 feet per minute
  • Motor: 1/2 HP
  • Voltage: 230/460, 3 PH, 60 Hz
  •  

MDRB - Medium Duty Roller Bed with 1.90" Diameter Rollers

Model MDRB is a medium duty roller bed belt conveyor. Due to the low friction roller bed, it's capable of moving heavier loads with less power than typical slider bed belt conveyors.

MDRB SPECIFICATIONS

ROLLERS: 1.9" diameter, 16ga wall tubes with 7/16" hex cold rolled steel axle
spring retained. Precision grease packed bearings.

BELT: Standard is Trackmate 120 EMB embossed cover with clipper lace.
Optional belts include Trackmate rough top, Trackmate friction cover, Trackmate
longitudinal groove, food grade white PVC & plied rubber slip top. Other belt
options available.

DRIVE: Standard drive is an End drive, right hand side. Optional drives include
End drive left hand side, Side drive right or left hand side, or Center drive right or
left hand side.

SUPPORT CENTERS: Standard supports are floor supports on 10’ centers.
Optional floor supports on 5’ centers; ceiling supports on 5' & 10'centers.

FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.

CLICK HERE for Factory Drawing

Call for pricing on other sizes 877-860-3620

Conveyor sizes available:

  • BELT WIDTH: 12", 18", 24", 30", 36" 42" 48"

    LENGTH: 60" - 1200"

    BEGINNING ELEVATION: 6.75" - 126"

    ENDING ELEVATION: 6.75" - 126"

    SPEED: 15 - 200 FPM

    ROLLER CENTERS: 3", 4.5", 6"