Clamp & Go Dolly Handle

Call for Price

  • Model: 24
  • Manufactured by: Morse

Morse Clamp & Go Dolly Handle
  • Handle Assembly for clamping onto dolly providing ergonomic transportation
  • Clamp has upper piece that adjusts for various dolly wall heights
  • Lower piece with pivotally attached handle
  • Handle stores upright, held in place by magnet
  • The Clamp & Go Dolly Handle can be used with round drum dollies of various sizes. Move the quick-pin to adjust for 2", 2.5" or 3" (5.08, 6.35 or 7.62 cm) tall dolly sidewall. One Clamp+Go TM works with all Morse round drum dollies, and with many other brands.

Morse Clamp & Go Dolly Handle (Patented Design)

Morse model 24

Reduce risks to workers with the ergonomic and safety conscious Morse Clamp & Go Dolly Handle. Attach Clamp & Go to the sidewall of your drum dolly with a downward push to engage the quick-coupling mechanism. Now you've got a drum dolly with a handle to pull or push to move your drum around. Easily move into and out of confined areas.

Increase worker safety by moving drum dollies with the Clamp & Go Dolly Handle. Don't risk catching your fingers between the drum and other objects. Drum dollies with handles are far more stable because you apply even force below the drum's center of gravity.

For safety reasons, use caution to maintain control and avoid tipping when pushing at the top of your drum to move a drum dolly. Lateral force at the top of the drum shifts over 70% of the weight to the front dolly wheels. This can make the dolly difficult to control, and potentially hazardous without warning - even topple over, especially if the dolly wheels hit an obstruction, a hole in the floor, or while descending a slope.

Decrease the risk of this happening by attaching the Clamp & Go to the drum dolly. You then pull from the bottom of the drum to move it around, with weight far more evenly distributed on all dolly wheels. You have greater control, and significantly reduce risk of tipping.

Call for more information: 877-860-3620