Bluff Dock Levelers

Edge of Dock and Lo-Dock Models

Bluff's edge of dock leveler is designed to have a working range of 5" above and 5" below dock level. Because of gradability problems, dock levelers are not recommended for use with pallet jacks or stackers.

EZ-Pull EDGE OF DOCK LEVELER (EP)

• Capacities from 20,000 to 25,000 pounds
• Automatically returns to stored position when truck leaves
• Self-Storing handle
• Bumper and bumper blocks included

Fast and easy to operate, Bluff's edge of dockleveler is positioned by lifting a self-storing handle and pulling the handle to the dock floor. The latch assembly activates the lip forward to the floor of the trailer as the handle is lifted. When released, the handle automatically returns to a stored position. The optimum dock height for conventional trailers is 51", while the proper dock height for refrigerated equipment is 55". Refrigerated lip is optional. Widths of 72" and 78" are available.

EP Models: - THESE UNITS ARE FOR FREIGHT LINE TRAILERS
MODEL	CAPACITY	LIP LENGTH	USEABLE WIDTH	OVERALL WIDTH	SPAN	WEIGHT	Price
20EP66	20,000	15"	66"	88"	27 3/4"	505	$ 884.
20EP72	20,000	15"	72"	94"	27 3/4"	545	$ 966.
20EP78	20,000	15"	78"	100"	27 3/4"	585	$1,167.
25EP66	25,000	15"	66"	88"	27 3/4"	562	$1,018.
25EP72	25,000	15"	72"	94"	27 3/4"	606	$1,087.
25EP78	25,000	15"	78"	100"	27 3/4"	657	$1,224.

EP-R Models - THESE UNITS ARE FOR REFRIGERATED TRAILERS
MODEL	CAPACITY	LIP LENGTH	USEABLE WIDTH	OVERALL WIDTH	SPAN	WEIGHT	Price
20EP66-R	20,000	17"	66"	88"	29 3/4"	520	$1,059.
20EP72-R	20,000	17"	72"	94"	29 3/4"	560	$1,146.
20EP78-R	20,000	17"	78"	100"	29 3/4"	610	$1,268.
25EP66-R	25,000	17"	66"	88"	29 3/4"	580	$1,134.
25EP72-R	25,000	17"	72"	94"	29 3/4"	626	$1,311.
25EP78-R	25,000	17"	78"	100"	29 3/4"	680	$1,413.

LO-DOCK LEVELER (LD)

• Raises edge of dock levelers to proper working height
• Completely assembled; no site welding required

Now without expensive dock alterations, you can raise the height of your present dock as much as 11". Lo-dock levelers can easily be installed on any concrete dock without welding or modifications. Refrigerated lip is optional. Complete technical information and installation instructions are available upon request.

LD Models - Lo-Dock Leveler - 20,000 Pound Capacity
		For Freightline Trailers			For refrigerated Trailers
RAMP UP	RAMP LENGTH	MODEL	WEIGHT	Price	MODEL	WEIGHT	Price
3	30"	20LD72-3	853	$1,706.	20LD72-3R	871	$1,937.
5	48"	20LD72-5	1,038	$1,829.	20LD72-5R	1,056	$2,070.
7	51"	20LD72-7	1,096	$2,012.	20LD72-7R	1,114	$2,332.
9	61"	20LD72-9	1,220	$2,133.	20LD72-9R	1,238	$2,465.
3	30"	20LD78-3	918	$1,767.	20LD78-3R	938	$2,010.
5	48"	20LD78-5	1,115	$1,889.	20LD78-5R	1,135	$2,142.
7	51"	20LD78-7	1,176	$2,072.	20LD78-7R	1,196	$2,273.
9	61"	20LD78-9	1,306	$2,195.	20LD78-9R	1,326	$2,405.
3	30"	25LD72-3	950	$1,829.	25LD72-3R	970	$2,008.
5	48"	25LD72-5	1,157	$1,950.	25LD72-5R	1,177	$2,140.
7	51"	25LD72-7	1,222	$2,072.	25LD72-7R	1,242	$2,272.
9	61"	25LD72-9	1,361	$2,195.	25LD72-9R	1,381	$2,404.
3	30"	25LD78-3	1,024	$1,889.	25LD78-3R	1,047	$2,087.
5	48"	25LD78-5	1,245	$2,012.	25LD78-5R	1,268	$2,219
7	51"	25LD78-7	1,312	$2,133.	25LD78-7R	1,335	$2,350.
9	61"	25LD78-9	1,458	$2,255.	25LD78-9R	1,481	$2,482.
LO-DOCK UNITS ARE SHIPPED COMPLETELY ASSEMBLED INSTALLATION INSTRUCTIONS ARE AVAILABLE UPON REQUEST

INSTALLATION MATERIALS
MODEL	OPTIONS	WEIGHT	Price
EPAP12C	12" LONG BEVELED APPROACH PLATE 120" WIDE WITH 5 EACH 13/16" COUNTER SUNK HOLES FOR MOUNTING TO TOP OF DOCK	164	$205.
EPAP24C	24" LONG BEVELED APPROACH PLATE 120" WIDE WITH 5 EACH 13/16" COUNTER SUNK HOLES FOR MOUNTING TO TOP OF DOCK	327	$349.
EPAP1	FASTENER KIT FOR EPAP12C & EPAP24C. CONSISTS OF 5 EACH 1/2'' DOUBLE EXPANSION SHIELDS AND 5 EACH 1/2''-13X3'' FLAT HEAD SOCKET SCREWS	3	$ 55.
EPAP2	FASTENER KIT FOR INSTALLATION OF THE LEVELER. CONSISTS OF 9 EACH 3/4''X4'' WEDGE ANCHOR BOLTS INCLUDING THE NUTS & WASHERS.	6	$ 64.
EPAP3	FASTENER KIT FOR INSTALLATION OF THE LEVELER AND APPROACH PLATE OR A LO-DOCK LEVELER. CONSISTS OF 9 EACH 3/4''X4'' WEDGE ANCHOR BOLTS INCLUDING THE NUTS & WASHERS. ALSO CONSISTS OF 5 EACH 1/2'' x 13'' x 3'' FLAT HEAD SOCKET SCREWS AND 5 EACH 1/2'' DOUBLE EXPANSION SHIELDS	6	$105.