Call Toll Free
   1-877-860-3620
   262-521-5730
Customer Service

Max Upenders


Call for Quote: 1-877-860-3620


Max-Tilt Upender

The MAX-UPENDER series is ideally suited for tipping loads up to 90 degrees. Available with capacities of 2,000 to 6,000 lbs. and a variety of standard platform sizes. The MAX-UPENDER is also available custom built for those special handling requirements. Designs of open frame, v-block, split platform and special sizes are just a few of our custom capabilities.
Standard Features
  • 1 1/2 HP motor. 115/230 volt single phase or 230/460 three phase voltage. Motor is internally mounted on most models.
  • Push button magnetic back control box is standard with 6' cord.
  • 10' power cord is standard (connector not included).
  • Hydraulic gear pump with check valve, solenoid valve, filter and velocity fuse is standard.
  • Tilt limit switch
  • Control box includes magnetic starter transformer, thermal overload and fuses.
  • Designed for surface mount or lift table mounting. Contact factory for special in floor requirements.
  • Powered up and down 90 degree tilt.
  • Color: Yellow top with blue frame.
  • A 30 amp dedicated circuit is required for 115 volt operation.
Options
  • Foot control switch
  • Lowering beeper
  • Remote power unit
  • Accordion bellows safety skirting
  • Special color
  • Adjustable tilt limit switch
  • Raised base
  • Contact us for other options
Custom Options
MAX-UPENDER with Cradle Top
Ideal for upending metal coils or paper rolls. Shown here with a split upper platform allowing shaft placement into load capacities from 2,000 to 6,000 lbs. with a variety of custom cradles and platform sizes.
tilt table upender
tilt lift table upender
tilt lift table upender
MAX-UPENDER
with Custom Platform

Shown to the left is an open frame platform. This custom design allows operator access to the upended item for some assembly and inspection. Contact us with your special upending requirements.
Model LPTT-UP-20-90
48 x 48 upper
48 x 48 lower 		LPTT-UP-20-90
48 x 48 upper
48 x 72 lower 		LPTT-UP-40-90
48 x 48 upper
48 x 48 lower 		LPTT-UP-40-90
48 x 48 upper
48 x 72 lower
Capacity (lbs) 2,000 2,000 4,000 4,000
Lower platform size 48 x 48 48 x 48 48 x 48 48 x 48
Upper platform size 48 x 48 48 x 72 48 x 48 48 x 72
Tilt 90 deg 90 deg 90 deg 90 deg
Lowered height 10" 10" 10" 10"
Cylinders (qty) 1 1 2 2
** Call us at 1-877-860-3620 for a quote on custom size requirements

Solution Dynamics, Inc. - PO Box 866 - Brookfield, WI 53008
Phone: 1-877-860-3620     -     Fax: 1-262-521-5733