185A

• Model: 185A
• Capacity: 800 lbs
• Lift, move, and pour a drum with your hoist or crane
• Rotate drum 360 deg. in either direction
• Drum adaptors available for fiber, plastic, and small dia. drums
• Every Morse below hook drum handler is load tested at the factory as per American National Standard ASME B30.20 and a load test certificate is shipped enclosed with each unit

Morse Below Hook Drum Handler

Pouring drums above your reach is easy with Morse Kontrol-Karriers. Dispense drum contents with your hoist or crane. Even lift and invert a drum with a drum faucet in place. You control drum tilting with chain loop, 360 degrees in either direction.

These below-hook drum carriers have a pull chain to control the drum tilt with a 30:1 gear and sprocket ratio for pouring drums.

Diameter Adaptors: Add the correct diameter adaptor for each smaller drum to handle multiple drum sizes with the same drum handler. Simply and quickly place into and remove from the drum holder. Adaptors for 17.5" diameter and smaller have adjustable hold down brackets for up to 38" tall drums.

Rim clamps and bracket assembly for plastic and fiber drums

Use these below the hook drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dump the entire contents with a drum inverter.